塑料闸瓦钢背俗称刹车片，用于各种车辆，每辆车上16个，材料为Q235-A，厚度t = 3mm。它是汽车制动系统的重要组成部分。
对塑料闸瓦钢背的设计中，通过对工件进行工艺分析，了解工件材料性能和加工方式，分析加工方案。通过比较各方案的特点和本工件的产能，确定该工件的加工方案。设计两套单工序模具，分别为落料模和弯曲模。设计主要探讨的是弯曲模，根据工件批量大的特点，使用经过改进的一种高效率的模具，即采用能一次成形的转轴式弯曲模。落料模主要是为弯曲模冲裁毛坯，要求效率高，因此设计成连续模。
在模具设计中主要根据工艺分析计算出毛坯尺寸，选择排样落料；然后计算冲压力，选择冲床；计算刃口尺寸，算出凸、凹模尺寸。最后选择模具的各个零件，再结合压力机闭合高度和工作台尺寸最终确定模具的构造，完成对模具的设计。
设计主要是用转轴配合凸、凹模运动从而能完成两次弯曲。它的应用比较广泛，首先可用于刹车片模具的改进，其次可作为其它需两次弯曲的模具结构。
关键词：弯曲模 闸瓦钢背 落料模
Abstract
Plastic shoe steel commonly known as brake pads for various vehicles, each vehicle on the 16, the material is Q235-A, thickness t = 3mm. It is an important part of the automobile braking system.
The brake steel back design through the process analysis of the workpiece, understand the workpiece material properties, processing methods and analysis processing scheme. By comparing the characteristics of each scheme and the capacity of the workpiece, the processing scheme of the workpiece is determined. Design of two sets of single process die, respectively, the blanking die and bending die. The design is mainly to discuss the bending mode, according to the characteristics of large workpiece, the use of a high efficiency of the mold, which can be used to form a rotating shaft bending die. Blanking die mainly for bending die blanking blank, high efficiency, so the design into a continuous mode.
In the die design, according to the process analysis to calculate the blank size, select the nesting blanking; then calculate the punch pressure, select the punch; calculate the edge size, calculate the convex, concave die size. Finally, select the various parts of the mold, and then combined with the height of the press and the size of the working table to determine the structure of the mold, to complete the design of the mold.
Design is mainly used in the shaft with a convex, concave die motion to complete the two bending. Its application is more extensive, the first can be used for the improvement of the brake pad, and then can be used as the other two bending die structure.
Keywords: brake steel back activities punch bending mode
12
12
