设计 任务书 文档 开题 答辩 说明书 格式 模板 外文 翻译 范文 资料 作品 文献 课程 实习 指导 调研 下载 网络教育 计算机 网站 网页 小程序 商城 购物 订餐 电影 安卓 Android Html Html5 SSM SSH Python 爬虫 大数据 管理系统 图书 校园网 考试 选题 网络安全 推荐系统 机械 模具 夹具 自动化 数控 车床 汽车 故障 诊断 电机 建模 机械手 去壳机 千斤顶 变速器 减速器 图纸 电气 变电站 电子 Stm32 单片机 物联网 监控 密码锁 Plc 组态 控制 智能 Matlab 土木 建筑 结构 框架 教学楼 住宅楼 造价 施工 办公楼 给水 排水 桥梁 刚构桥 水利 重力坝 水库 采矿 环境 化工 固废 工厂 视觉传达 室内设计 产品设计 电子商务 物流 盈利 案例 分析 评估 报告 营销 报销 会计
 首 页 机械毕业设计 电子电气毕业设计 计算机毕业设计 土木工程毕业设计 视觉传达毕业设计 理工论文 文科论文 毕设资料 帮助中心 设计流程 
垫片
您现在所在的位置:首页 >>电子电气毕业设计 >> 文章内容
                 
垫片
   我们提供全套毕业设计和毕业论文服务,联系微信号:biyezuopin QQ:2922748026   
车用动力电池混合预热及远程控制系统设计
文章来源:www.biyezuopin.vip   发布者:毕业作品网站  
车用动力电池混合预热远程控制系统设计
摘要:  当今世界,随着经济、科技的高速发展,人们也日益意识到能源的问题。作为世界经济、科学发展的支柱产业之一的汽车业,也面临着新的挑战与机遇。为了减少燃油的消耗并降低有害气体的排放,目前汽车业的发展方向为混合预热汽车与电动汽车。传统混合预热汽车,能减少一定的燃油消耗,但是并不能彻底实现燃油替代。而电动汽车实现了零油耗,零排放,但是续驶里程较短。因此,结合了两者优点,可通过外部电网充电的车用动力电池混合预热汽车(Plug-in Hybrid Electric Vehicle,以下简称EK2)成为了研究的热点。
本文根据EK2技术的研究现状与发展趋势,以满足整车动力性能和提高整车经济性能为目标,设计适合于城市工况的EK2EK2远程,并设计适用于该EK2远程控制系统
本文首先进行EK2EK2远程关键部件设计,包括发动机、电动机、电池的选型与参数匹配,并在AVL CRUISE软件中构建EK2EK2的整车模型。通过分析车辆在各个工作模式下的能量流动,针对EK2EK2的特点,设计基于规则的逻辑门限值的远程控制系统,在MATLAB/SIMULINK中建立EK2EK2远程控制系统的仿真模型。最后通过CRUISEMATLAB/SIMULINK的联合仿真,检验远程控制系统的效果。仿真结果表明,本文设计的EK2EK2,在满足动力性要求的基础上,能量消耗明显下降,尾气排放明显减少,达到设计目标。
 
关键字车用动力电池混合预热远程远程控制系统CRUISE仿真;燃油经济性
             
 

 
Abstract: The world today, with the rapid development of economy and technology, people are increasingly aware of the problems of energy. As the pillar industries of the world's economic, scientific development, automobile industry is also facing new challenges and opportunities. In order to reduce fuel consumption and reduce harmful exhaust emissions, the direction of development of the automotive industry is hybrid vehicles and electric vehicles.
Traditional hybrid vehicles can reduce fuel consumption, but not the full realization of the alternative fuel. Electric vehicles to achieve a zero fuel consumption and zero emissions, but the short for driving range. Combines the advantages of both, the Plug-in Hybrid Electric Vehicle (hereinafter referred to as the EK2) which can be charged by an external grid has become a research hot spot.
Based on the research status and development trend of the EK2 technology to meet the goal of vehicle dynamic performance and improve the vehicle of economic performance, design the EK2 bus power system which is suitable for urban conditions , and design  the bus control strategy.
Firstly, design the key components of the EK2 bus power system, including the selection matches the parameter of the engine, electric motor, battery, and build the EK2 bus model in software AVL CRUISE. Design rule-based logic threshold control strategy through the analysis of the energy flow of vehicles in each operating mode, the characteristics of the EK2 bus, established in MATLAB / SIMULINK simulation model of the EK2 bus power system control strategy. Finally, build a CRUISE and MATLAB /SIMULINK simulation, inspect and control the effects of the strategy. The simulation results show that this paper, the design of the EK2 bus, to meet the power requirements on the basis of energy consumption decreased emissions significantly reduced to achieve the design goals.
KeywordPlug-in Hybrid Electric Vehicle; Vehicle Control Strategy; Modeling in CRUISE; Fuel Economy

  
 
  全套毕业设计论文现成成品资料请咨询微信号:biyezuopin QQ:2922748026     返回首页 如转载请注明来源于www.biyezuopin.vip  

                 

打印本页 | 关闭窗口
本类最新文章
捻线机基于PCI的控制系统设计 基于PLC的步进电机控制系统设计 含风电场潮流计算及接入系统设计
某MW级风力发电场电气初步设计 新建边城变110千伏输变电工程设 基于PLC控制的小车运料控制系统
| 关于我们 | 友情链接 | 毕业设计招聘 |

Email:biyeshejiba@163.com 微信号:biyezuopin QQ:2922748026  
本站毕业设计毕业论文资料均属原创者所有,仅供学习交流之用,请勿转载并做其他非法用途.如有侵犯您的版权有损您的利益,请联系我们会立即改正或删除有关内容!